Tensorgrip® L10N is a non-flammable high performance spray contact adhesive formulated for bonding decorative HPL (high pressure laminate) to a variety of substrates. This is designed to deliver a smooth, strong bond in nearly any laminate application while maintaining perfect non-flammable properties. Formulated with CO-REZ Technology, Tensorgrip® L10N is an exceptional formulation incorporating a highly engineered resin and gas matrix. The result is greater coverage from less canister weight.
FEATURES
ALUMINUM / STANDARD LAMINATE / WOOD BUILDUPS / WEB SPRAY / ZERO-FLAM TECHNOLOGY /CO-REZ TECHNOLOGY
ADVANTAGES
Fast. High Tack
Excellent high coverage
80% of final strength achieved immediately
Full strength achieved in 24 hours
Fast drying with long open time
Excellent green strength and high heat resistance
Over 105°C temperature resistant
VOC free
DIRECTION FOR USE
TensorGrip L10N is designed as a portable, selfcontained spray system for field or shop applications.
Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
Parts should be mated with as much pressure as practical.
Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
Canister system will spray adequately above 15ºC. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
