Bostik 2701 Spray Contact 20L - Clear

Product Information

AW 2700 / 2701 Contact Adhesive is a premium quality, high solids, sprayable contact adhesive, featuring high heat resistance, good sprayability, early green strength coupled with a good working tack life.

AW 2700 / 2701 gives strong adhesion to a wide range of materials including decorative plastic laminates (Formica, Laminex), timber and timber composites, many natural and synthetic rubbers, cementitious composites, ferrous and non ferrous metals and polyurethane foam.

Specifically designed for easy spraying without cob webbing, especially where automatic spraying equipment is employed, AW 2700 / 2701 is suitable for use with all current post forming equipment designed for use with contact cements. (heated bar or infra red bank heaters).

AW 2701 is also used in boat and automotive interior applications where laminating or upholstery trimming work is required.

• n-hexane solvent safe
• Quick drying

• High heat resistance (100⁰C)
• High early green strength

• AW 2700 / 2701 is designed for application by spray using suction feed or pressure pot equipment. Apply an even coating of adhesive to both surfaces, covering at least 80% on each surface. Edges to be post-formed MUST have 100% coverage. Highly porous or absorbent surfaces may require two coats.
  
  
• Allow the first coat to tack off before applying the next.
  
  
• Allow the adhesive to dry for approximately 10-15 minutes (depending on atmospheric conditions) or until the surface can be touched without any adhesive transfer.

• Align surfaces then join by applying even and firm pressure, avoiding air entrapment. For large flat areas the use of nip or hand rollers are recommended.
  
  
• A minimum pressure of 280kPa (40psi) is required to give optimum bond strength. Hand pressure is not sufficient! Bonding of materials should occur within 20 minutes of adhesive application for optimum bond strength – if left longer, a light spray coat to both surfaces should be re-applied to reactivate the adhesive.