Curved Coat Hook SCP Non-Concealed Fix

Product Information

Material Specifications

• Die Cast Zinc Body
• Rubber Bumper

Dimensions

• 42mmW x 42mmH x 90mmD

Mounting

• Screw Fix

Installation Guidelines

• May be subject to Australian Building Code Regulations for
  able bodied and/or disabled use. It is recommended that
  any individual unit is installed whereby it clears any other
  fixtures by at least 150mm and not carry loads any greater
  than 8kg.

1. Locate fixing position on wall or partition and mark using
   mounting holes, ensuring hook is level.
2. Drill holes and loosely secure unit to wall surface using
   appropriate screws and wall plugs.
3. Check the hook is level and tighten screws to finish
   installation

Features

• Rubber bumper protects walls or partition surfaces from
  being damaged.